Followers

I CT for:

Sunday, July 22, 2012
This tutorial was written for those that have a working knowledge of PSP

Supplies needed:

I used Goddess 2 by Scrappin Krazy Designs which you can get ~>HERE

Tube of Choice
I am using the artwork of Keith Garvey. You must purchase a license to use this art. You may do so at PTE ~>PTE

Mask of Choice
I used AR315_Masks_083 by Aqua. You can find it on her blog here ~>HERE

Filters I used

Dropshadow included with program (settings 1,1,50,5 black)
Gaussian Blur (included with program)
Xero: Fritillary

- Lets get started -

Open a new document sized 700x700. You can crop and resize finished tag to your liking.

Add frame 2, resized by 80%, as a new layer and make sure it is centered

Add glitterspill behind your frame to the left side of frame. Duplicate/mirror/flip. Dropshadow

Add p08 behind your frame layer. Using your magic wand select inside your frame and then expand by 5, invert
and delete the excess paper.

Use Xero: Fritillary on your paper layer using the settings in the screenshot below
Add spiralgem, resized by 50%, place on the right upper corner. Duplicate/mirror/flip. Dropshadow
See my tag for placement reference

Open wire1 and rotate right. Resize by 80%. Place under your sprialgem on the right upper corner.
Duplicate/mirror/flip, making sure that its also under your spiralgem on the left lower corner. Dropshadow

Add your tube of choice as the top layer. Duplicate. Use the dropshadow on original tube layer.
See my tag for placement.

On your duplicate tube layer add a gaussian blur of 3 and change the layer to Soft light. Merge the duplicate
tube layer and your original tube layer together.

Add p07 as your bottom layer and apply your mask to this layer and merge group

Resize or crop to your liking

Add the correct copyright for the artist you used

Add your name in the font of your choice.

Save your tag!
Sunday, July 8, 2012

This tutorial was written for those that have a working knowledge of PSP

Supplies needed:

I used Lollipop Porn by Scrappin Krazy Designs which you can get ~>HERE

Template 17 by Kimberely which you can get ~>HERE


Tube of Choice

I am using the artwork of Keith Garvey. You must purchase a license to use this art. You may do so at PTE ~>PTE


Filters I used

Dropshadow included with program (settings 1,1,50,0 black)
Add noise included with program
Gaussian blur included with program
Richard Rosenman Scanlines


- Lets get started -

Open your template, resize the canvas to 700x700, you can crop and resize to your liking at the end.
Delete the credit layer

Add halftone element as a new layer behind the rectangles layer and make sure it is centered. Dropshadow

Add p12, resized 75%, above circle frame layer. Select the circle frame and select all/float/defloat/invert
select your paper layer and hit delete on keyboard. Delete the old frame layer

Add noise 100% uniform monochrome checked to the new frame layer

Add p06, resized 80%, above rectangles layer. Select the rectangles layer and select all/float/defloat/invert
select your paper layer and hit delete on keyboard. Delete the old rectangles layer

Add a new layer above your tone layer. Floodfill this layer with black. Select the tone layer and select all/float/defloat/invert
select your black layer and hit delete on keyboard. Delete the old tone layer

Change the opacity of the tone layer to 56

Add p09 above the circle layer. Select the circle layer and select all/float/defloat/invert
select your paper layer and hit delete on keyboard. Delete the old circle layer

Add p08 above the arrows layer. Select the arrows layer and select all/float/defloat/invert
select your paper layer and hit delete on keyboard. Delete the old arrows layer

Add noise 50% uniform monochrome checked to the new arrows layer. Dropshadow.

Add your tubes of choice as the top layer. Place one on each side of the circle frame. See my tag for
placement. Merge your tubes together onto one layer. Duplicate the tubes layer.

On your duplicate tubes layer add a gaussian blur of 3 and change the layer to Soft light. Merge the duplicate
tubes layer and your original tubes layer together.

Add your close-up tube above your pink paper layer. Select your pink paper layer and select all/float/defloat/invert
select your close-up tube layer and hit delete on keyboard. This should erase all the excess tube.

Duplicate your close-up tube layer. On the original tube change it to luminance (L). On the duplicate layer add a
gaussian blur of 3 and change the layer to Screen.

Close all your layers except the pink paper one and 2 close-up layers. Merge visible on these three layers.

On your close-up layer use scanlines filter with the settings I have listed below on the screenshot


Add frame 3 above your tone layer and center. Dropshadow

Add the martini element, resized 50%, behind your tube layer. Dropshadow, see my tag for placement.

Add the whip element, resized 50%, behind your tube layer. Dropshadow, see my tag for placement.

Resize or crop to your liking

Add the correct copyright for the artist you used

Add your name in the font of your choice.

Save your tag!


Monday, June 11, 2012
Here is a Cluster Frame I made using the Country Girl kit by Scrappin Krazy Designs. You can get the kit HERE


You can get the cluster frame HERE


Here is the tag I made using the cluster frame

Sunday, June 10, 2012
This tutorial was written for those that have a working knowledge of PSP

Supplies needed:

I used Country Girl by Scrappin Krazy Designs which you can get ~>http://scrappinkrazydesigns.blogspot.com/?zx=a3351d7230d0c2ac

Tube of Choice
I am using the artwork of Keith Garvey. You must purchase a license to use this art. You may do so at PTE ~>http://www.psptubesemporium.com/

Mask of Choice
I used AR315_Masks_050 by Aqua. You can find it on her blog here ~>http://aquarebel315.blogspot.com/?zx=e8709b850986ff02
Filters I used

Dropshadow included with program (settings 1,1,50,5 black)


- Lets get started -

Open a new document sized 700x700. You can crop and resize finished tag to your liking.

Add ele50 as a new layer and make sure it is centered

Add a close up of your tube to the center of your frame. If larger than the frame than erase excess tube that
shows at the bottom of the frame. See my tag for placement reference

Add p13 behind your frame layer. Using your magic wand select inside your frame and then expand by 5, invert
and delete the excess paper.

Add ele38 behind your frame in the upper left corner.

Add ele18, resized by 60%, on top of your tube on the lower right corner at a slight angle. See my tag for
placement reference

Add ele13 to the top of your frame so that it is covering the bottom portion of your frame as in my tag.
I erased a small bit of excess that was hanging over the frame.

Add ele27, resized by 80% and mirrored, behind your washboard element so that it covers the side of the
frame.

Add ele89 behind your tube layer on the upper left corner of your frame

Add p11 as your bottom layer and apply your mask to this layer and merge group

Add your dropshadow of choice or the one I have listed to your elements

Resize or crop to your liking

Add the correct copyright for the artist you used

Add your name in the font of your choice.

Save your tag!
Friday, June 8, 2012

This tutorial was written for those that have a working knowledge of PSP

Supplies needed:

I used Rockabilly Scrapkit by Scrappin Krazy Designs which you can get ~>Scrappin Krazy Designs

Tube of Choice
I am using the artwork of Arthur Crowe. You must purchase a license to use this art. You may do so at his store ~>Arthur Crowe's Factory

Filters I used

Dropshadow included with program (settings 1,1,50,5 black and -1,-1,50, 5 black)


- Lets get started -

Open a new document sized 700x700. You can crop and resize finished tag to your liking.

Add ele36 as a new layer and make sure it is centered

Add ele25 behind your frame layer making sure its centered. Dropshadow.

Add p06 behind your frame. Using your magic wand select the inside the frames, expand by 10
invert and then delete the excess paper.

Add your tube and center. I resized my tube by 80% due to the size of it.

Behind tube:

Add ele69, re-sized by 50%, to the bottom corner of your red frame and duplicate. Moved the duplicated
element under the frame. On the original I erased some of the of razor blade so the frame would appear
to be in the middle of it. Dropshadow the bottom element.

Add ele08, resized by 50%, where the 2 blue frames meet. Sharpen. Dropshadow.

Add ele14, resized by 20%, where the red and blue upper frames meet. Sharpen. Dropshadow.

Add ele44  inside the red frame behind your tube

Add ele13, resized by 60%, at the bottom corner of big blue frame. Dropshadow

Add ele38 behind the frame layer.

Resize or crop to your liking

Add the correct copyright for the artist you used

Add your name in the font of your choice.

Save your tag!

Saturday, May 12, 2012
I made these extras using Scrappin Krazy Design's Dangerous kit which you can get here ~> http://scrappinkrazydesigns.blogspot.com/














Click on tag to make it larger and save it.
I will be writing a tut up for the tag in just a bit.
Sunday, May 6, 2012



This tutorial was written for those that have a working knowledge of PSP

Supplies needed:

I used Tropical Peach Scrapkit by Scrappin Krazy Designs which you can get ~>http://scrappinkrazydesigns.blogspot.com/?zx=a3351d7230d0c2ac

Tube of Choice
I am using the artwork of Zlata_M. You must purchase a license to use this art. You may do so at PFD ~>http://picsfordesign.com/

Filters I used
Xero Procelain
Xero Radiance
Richard Rosenman Scanlines
Dropshadow included with program (settings 1,1,50,5 black and -1,-1,50, 5 black)
Gaussian Blur included with program

- Lets get started -

Open a new document sized 650x250

Add a paper of choice I used p14 and resized to 450x450, duplicate this layer and hide it for later

Add your tube, center and hide this layer, since I used a tube from PFD I didn't need to use a close-up

Behind your main tube layer add your close-up again positioned towards the left hand side duplicate and mirror,
merge these 2 tubes together.

Duplicate this layer, on the original change to luminance (L) and change opacity to 28 and the duplicate layer
to soft light with a gaussian blur of 3. On the duplicate layer add xero procelain and xero radiance default settings

Merge the paper layer and close-up tube layers. Use the scanlines plugin with the following settings



On your duplicate paper layer select all and select selection borders with the following settings and invert and clear so that you
are left with a frame. Add noise shown in the second screenshot shown below. Move this to top of your layers





Add your elements of choice behind your main tube layer. I used the following elements in my example tag

ele50- peach ribbon
ele16- sparkle
ele27- pink heart resized by 20%

Add the correct copyright for the artist you used

Add your name in the font of your choice.

Save your tag but don't merge layers together we need it open to do the avatar

For the avatar:

Open a new document sized 175x175

I copied my merged tube/paper layer and pasted it as a new layer resized by 75% or to your liking

Add your main tube to the left of the avatar. I resized mine by 70%

I added ele16 behind my tube and drop shadowed it

I added p14 as a top layer resizing it to 175x175 pixels and used the same selection border as the sig

Add the correct copyright for the artist you used

Add your name or initial in the font of your choice

Save your tag

Creative Misfits

Friend's Blinkies